► EDGE   ► ETN, ES   ► HT   ► AGE   ► FTE, FSE    ► ATE, ASE   ► DFC   ► APC   ► SPECIAL   ► SOUNDHOLE PICKUP  ► PIEZO PICKUP  ► ENDPIN PREAMP
 

FTE, FSE Series
 High quality Equalizers for thin body acoustic guitars.
- Width : 41.0 mm -

Cutting Templates (installation)

   Dimension : W 41 x H 88 x D 40   (mm)
    ** width of the preamp : 41mm

FTE-4

Slim 4 band eq
for upper-bout


 

Features
Bass : ±12 db at 100 Hz
Middle : ±12 db at 800 Hz
Treble : ±12 db at 3 kHz
Presence : ±12 db at 15 kHz
Volume : 0 ~ 10
Low  Battery check LED
2.5 mm Input Jack
1/4" Output Jack w/ cable
Current : 0.5 mA
Battery life time : over 1000 hours

FSE-4

Slim 4 band eq
for lower-bout


 

FTE and FSE series is specially designed for ultra-thin guitar body. It is only 41mm in width with battery case on-board. Factory friendly design with easy of installation for the hollow body electric guitars or round bowl back acoustic-electric guitars. FTE-4, FSE-4 (4 band equalizer with master volume), FTE-3, FSE-3 (3 band equalizer with master volume) and Tuner models and FM transmitter equipped preamp are available in FTE and FSE series.  

FTE-3

Slim 3 band eq
for upper-bout

Features
Bass : ±12 db at 100 Hz
Middle : ±12 db at 800 Hz
Treble : ±12 db at 3 kHz ~
Volume : 0 ~ 10
Low  Battery check LED
2.5 mm Input Jack
1/4" Output Jack w/ cable
Current : 0.5 mA
Battery life time : over 1000 hours

FSE-3

Slim 3 band eq
for lower-bout

FTE3TN

Chromatic Tuner with 3band EQ

FSE3TN

Chromatic Tuner with 3band EQ

The FTE3TN, FSE3TN features 3 band EQ sliders with Master Volume and On-board Digital Chromatic Tuner.  It provides precise digital tuning reference and indicates when a string is sharp, flat, or on pitch for your guitar in any place without extra tools. When the '#' marked LED is on with green light, you have to undo the string until 'OK' marked LED is on with red light. Start with pressing the Tuner switch button to turn the Tuner function on. Check with '▶' or '◀' marked LED for a fine adjustment.  Now you are ready to tune your guitar.

Features

Bass : ±12 db at 100 Hz
Middle : ±12 db at 800 Hz
Treble : ±12 db at 3 kHz
Volume : 0 ~ 10
Tuner Switch - push on pull off
2.5 mm Input Jack

1/4" Output Jack w/ cable
Current : 0.4 mA
Battery life time :
Only EQ use : over 1300 hours
Tuner use : over 300 hours
 

FTE-TN

Chromatic Tuner with 2band EQ

FSE-TN

Chromatic Tuner with 2band EQ

The FTE-TN and FSE-TN features 2 band EQ sliders with Master Volume and On-board Digital Chromatic Tuner.  It provides precise digital tuning reference and indicates when a string is sharp, flat, or on pitch for your guitar in any place without extra tools. When the '#' marked LED is on with green light, you have to undo the string until 'OK' marked LED is on with red light. Start with pressing the Tuner switch button to turn the Tuner function on. Check with '▶' or '◀' marked LED for a fine adjustment.  Now you are ready to tune your guitar.

Features

Bass : ±12 db at 100 Hz
Treble : ±12 db at 3 kHz
Volume : 0 ~ 10
Tuner Switch - push on pull off
2.5 mm Input Jack

1/4" Output Jack w/ cable
Current : 0.4 mA
Battery life time :
Only EQ use : over 1300 hours
Tuner use : over 300 hours 

FTE-AIR

FM Transmitter EQ with 3band EQ

These days more and more Acoustic guitars tend to have the pickups and equalizers on the guitar body, but most of the guitar customers, who are beginners and amateur players, are unlikely to have an acoustic guitar amplifier so it seems difficult for them to have a chance of using pickups and equalizer because the acoustic guitar amplifiers are less various and more expensive than electric guitar amplifiers.
However general home mini stereo, portable stereo, or car-stereo have the much better characteristics for acoustic guitar than using electric guitar amplifiers.
Artec FTE-AIR is designed to be able to use the common stereos like an acoustic guitar amplifier to use FM band.
The selection of frequency goes from 87Mhz~within 92Mhz range on your free choices.

      printable sheet (PDF)

Features
Bass : ±12 db at 100 Hz
Middle : ±12 db at 800 Hz
Treble : ±12 db at 3 kHz
Volume : 0 ~ 10
Tune : 87Mhz~92Mhz
FM Transmitter LED
2.5 mm Input Jack
1/4" Output Jack w/ cable
Current : 0.5 mA (2.5mA)
Battery life time :
Only EQ use : over 1000 hours
FM Transmitter use : over 300 hours

 ORDERING GUIDE

       ORDER CODE

    [preamp]-YYY-ZZZ-PPP
 

     BASIC CONDITION
    - Include STD-jack, wire clip and mount screws.
    - Not include piezo pickup and battery.
    - Piezo pickup should be purchased separately from preamps.

  [preamp] : Preamp model  
     ├ FTE-4
     ├ FTE-3
     ├ FTE3TN
     ├ FTE-TN
     ├ FTE-AIR
     ├ FSE-4
     ├ FSE-3
     ├ FSE3TN
     └ FSE-TN
 

 YYY : Endpin jack option - optional
    ├ STD    (default option)
    ├ EPC
    ├ EPG
    ├ EPB
    ├ ENN
    ├ ENG
    └ XLR
   
                             Go To Endpin jacks

 ZZZ : Piezo Pickup - optional
    ├ PP607
    ├ PP617

    ├   ...
    ├   ...      
 
 
 
 
                                Go to Piezo page

 PPP : Package - optional
    ├  BULK : bulk package
    ├  PCK1 : individual bliste
    └  PCK2 : individual paper box
 
 
 
 
 
                                    Go to Packages